Diamond Pacific Carving Wheels
GALAXY WHEELS FOR CARVING
Genie owners can obtain maximum convenience
by mounting the special carving wheels on a separate right hand adaptor. This eliminates the need of taking the Nova Wheels off their right hand adaptor and putting on the carving wheels each time. Pixie owners can use an extra right hand adaptor (which holds the far right hand Nova Wheel) for the same purpose. Wheels on the Titan fit directly on the shaft. Call us to determine your particular need.
USE EXTRA ADAPTORS FOR MOUNTING CARVING WHEELS
USE THESE ROUNDED-FACED CARVING WHEELS when doing carving, intarsia, channel work, stained glass and other applications that require curved edges. Use the 1⁄4" and 1⁄2" widths for narrow grooves and the 1" wide for larger ones. Four wheel diameters increase your choices. All Galaxy carving wheels can be used on the Titan. All but the 8" wheels can be used on the Genie. Only the two and four inch wheels can be used on the Pixie. These wheels can also be used on most other grinding machines that have standard arbors. Our Galaxy carving wheels have special shapes and sizes for helping the sculptor grind those difficult grooves and curves in stone. Galaxy Wheels have 1" arbor holes. To order bushings, see page 12. The four and six inch diameter wheels take one 1" bushing. The two inch wheel takes one 3⁄4" bushing and the 75⁄8" inch wheel takes two 3⁄4" bushings.
ORDERING EXTRA SPACERS FOR MOUNTING CARVERS. You may need to know hub widths to order extra spacers to mount your carvers. Hub width for all 2" dia. carvers is 3⁄4"; for 4" dia. is 11⁄4"; for 6" dia. is 1"; and for 8" dia. is 11⁄2". To order extra